Perchloric acid, also known as hyperchloric acid, chemical formula HClO₄, molecular weight 100.46. It is one of the six major inorganic strong acids and the strongest known inorganic oxoacid. It appears as a colourless, transparent fuming liquid at ambient temperature, fuming heavily in air and highly hygroscopic. It is both a strong acid and powerful oxidizer with strong corrosivity and irritation. It is widely used in the production of perchlorates, electrolytic polishing, synthetic diamond purification, pharmaceutical manufacturing and analytical reagents.
Before procurement, please clarify its regulatory status: perchloric acid is not an ordinary acid. Its hazard category and regulatory regime differ drastically depending on concentration.
| Item | Description |
|---|---|
| Chinese Name / Alias | Perchloric acid / Hyperchloric acid |
| CAS No. | 7601-90-3 |
| Formula / Molecular Weight | HClO₄ / 100.46 |
| UN Number | 1873 (50%–72% concentration) |
| Dangerous Goods Code | 51015 (50%–72%); 11026 (≥72%); 81022 (≤50%) |
| Hazard Class | Class 5.1 Oxidizer (50%–72%); ≥72% managed as explosive substance; ≤50% as Class 8.1 Corrosive substance |
| Control Status | Listed as explosive-precursor hazardous chemical, regulated by public security authorities under the Regulations on the Safety Administration of Hazardous Chemicals |
| Parameter | Description |
|---|---|
| Appearance | Colourless transparent fuming liquid (anhydrous form: colourless, transparent fuming oily liquid) |
| Melting Point | Approx. -112°C (anhydrous; some references state -122°C, refer to accompanying SDS) |
| Boiling Point | Anhydrous acid: approx. 130°C (with violent decomposition); 72.4% azeotrope: approx. 203°C |
| Relative Density (water=1) | 1.76–1.77 |
| Solubility | Miscible with water in all proportions; soluble in ethanol and chloroform |
| Acidity | Strongest inorganic oxoacid |
| Saturated Vapour Pressure | 2.00 kPa (14°C) |
| Acute Toxicity LD₅₀ | 1100 mg/kg (oral, rat); 400 mg/kg (oral, dog) |
Hazard level, dangerous goods code and compliance requirements are determined by concentration, which must be confirmed before order placement. The mainstream commercial grade is 50%–72%. Guaranteed reagent and analytical reagent grades are commonly 70%–72%, while industrial grade is around 60%. The 72.4% azeotrope, boiling at about 203°C, is relatively stable and serves as the standard concentration for commercial products. Anhydrous perchloric acid and concentrations above 72% are highly unstable and not regular circulating commodities.
Buyer reminder: Concentrated perchloric acid decomposes on standing, and decomposition accelerates under heating, which may lead to explosion. Contact or mixing with organic materials, reducing agents, flammables (sulphur, phosphorus, etc.) carries fire and explosion risks. Anhydrous perchloric acid releases intense heat when mixed with water. Regardless of concentration, organic contamination must be strictly isolated during storage and handling.
| Concentration Range | Hazard Class / Code | Typical Specifications & Applications | Risk & Stability Notes |
|---|---|---|---|
| ≥72% (including anhydrous acid) | Explosive substance (GB 1.1, Code 11026) | Non-standard commercial goods, only for special controlled scenarios | Spontaneous decomposition: anhydrous acid turns yellow within 12–14 hours, may blacken and explode in around 10 days; extreme explosion risk upon contact with organics |
| 50%–72% | Class 5.1 Oxidizer (UN1873, DG Code 51015) | GR/AR grade 70%–72%; industrial grade ~60%; mainstream commercial concentration | 72.4% azeotrope is relatively stable; still a strong oxidizer, organic contamination must be prevented |
| ≤50% | Class 8.1 Corrosive substance (Code 81022) | Dilute acid for low-concentration processes | Better stability, yet strongly oxidizing and corrosive; caution is still required |
| Application | Procurement Considerations |
|---|---|
| Perchlorate production (including ammonium perchlorate precursor) | Verify batch-to-batch concentration stability and impurity levels; confirm technical indicators per batch |
| Electrolytic polishing / electroplating / metal dissolution | Control concentration and moisture; no organic residues on site |
| Analytical reagents / chromatographic analysis | Select GR/AR grade (70%–72%); request batch COA |
| Electronics industry (LCD etching, electronic applications, ore extraction) | High purity & low impurity requirements; confirm specifications item by item with supplier |
| Pharmaceutical, synthetic diamond purification, film processing, grinding wheel decarbonization, polymer solvent, cellulose acetylation catalyst | Confirm concentration grade and packaging form according to process requirements |
Perchloric acid is classified as hazardous chemical and explosive-precursor substance. Domestic purchase and transportation require filing or approval as required by public security authorities. Export documentation is more stringent than ordinary chemical products. In practice, most shipment delays are not caused by stock shortage, but inconsistent information on documents: mismatched company name, destination country, product name, quantity and end-use, resulting in rejection by customs or shipping lines.
Documents normally provided by the supplier:
Business license and hazardous chemical operation qualification (for verification)
Bilingual MSDS (compiled in accordance with the latest GHS standard)
Hazard classification identification report (mandatory for customs origin inspection)
Dangerous goods packaging certificate
Export hazardous chemical manufacturer declaration of conformity
Batch COA (including concentration and impurity test data for acceptance)
Customs and maritime dangerous goods declaration documents
Documents to be provided by the buyer:
Business registration certificate / business license (for first cooperation)
End-use statement, stating genuine industrial application and commitment against resale or diversion
Intermediary undertaking letter and end-user contract if the buyer is a trader
Import approval documents for oxidizing liquids and explosive-precursor chemicals required by the destination country
Key reminder: All documents must show consistent company name, destination country, product name, quantity and end-use; discrepancies will lead to shipment delays.
Due to its strong oxidizing property and explosive-precursor status, domestic circulation of perchloric acid is subject to public security supervision, with purchase and transport subject to formal procedures. For exports, a dual-use item export license is generally not required for ordinary civil industrial uses. However, pre-shipment assessment is necessary if any of the following applies: destination country is sensitive; end-use involves propellants or energetic materials; the buyer purchases other controlled chemicals or precursors together.
If any of the above conditions apply, communicate in advance with commerce authorities and local customs to confirm whether prior approval is triggered. Meanwhile verify import permits and end-user review requirements of the destination country. Do not arrange production before confirming permits — repackaging, concentration adjustment or order cancellation after goods are ready will incur far higher costs.
Transportation: 50%–72% commercial perchloric acid is shipped by sea under UN1873, Class 5.1 oxidizer. Dangerous goods declaration must be truthful; shipping lines reject misdeclaration. Concentrations ≥72% and anhydrous acid are classified as explosive substances and are not available for regular commercial transport. Reject over-concentrated or uncertified sources. Air freight is highly restricted for oxidizers and explosive precursors and is not feasible for commercial bulk shipments. Sea freight is the primary option with sufficient lead time reserved.
Storage requirements: Store in a dedicated, cool and ventilated warehouse with temperature ≤30°C, away from ignition sources and heat. Keep containers sealed to avoid moisture absorption and concentration change. Store separately from acids, alkalis, amines and other incompatible materials. Prepare leakage response kits and suitable containment materials. Critical warning: contact with carbon, paper, organics, reducing agents, sulphur or phosphorus may trigger combustion or explosion. Site management rule: no organics, no reducing agents, dedicated storage.
Fire-fighting and emergency response: If organics are present on site, explosion risk exists during fire fighting; personnel shall not approach casually. Suitable extinguishing media: water spray, foam, CO₂ and sand. Health hazard: perchloric acid severely irritates and corrodes skin, eyes and respiratory tract. Upon contact, remove contaminated clothing immediately, rinse thoroughly with plenty of running water and seek medical care. Ingestion causes upper gastrointestinal burns; allergic individuals may develop chronic dermatitis.
Confirm concentration grade first. Concentration determines hazard classification, DG code, packaging standard and compliance path: reagent grade (70%–72%), industrial grade (~60%), or dilute acid ≤50% compatible with your process.
Verify local filing and import approval. Confirm whether local authorities require purchase filing or import permits for hazardous chemicals and explosive precursors; confirm warehouse acceptance qualification for Class 5.1 oxidizers. Complete verification before cargo arrival.
Avoid tight shipping schedules. DG packaging inspection, origin inspection, booking and maritime declaration take time. Reserve several weeks from contract to loading; add another 2–4 weeks for controlled cases.
Submit complete documents at order placement. Provide business license, end-use statement and destination permits upfront to avoid detention and container demurrage due to post-shipment document supplementation.
Check concentration and packaging upon receipt. Verify assay content, DG certificate and hazard labels (Class 5.1, UN1873, DG Code 51015). Reject goods with excessive concentration, damaged packaging or missing marks.
Prepare storage facilities in advance. Dedicated warehouse, ventilation, temperature below 30°C, full segregation from organics and reducing agents. Do not arrange shipment if compliant storage is unavailable.
Guangxi Avatar Chemical Co., Ltd. is based in Guangdong and serves South China. We provide the following support for industrial users and traders purchasing perchloric acid:
Assist in matching concentration grade and application, covering reagent grades (GR/AR, 70%–72%) and industrial grade (~60%)
Support preparation and verification of MSDS, classification report, DG packaging certificate, conformity declaration and other compliance documents
Coordinate qualified dangerous goods logistics providers for booking, maritime declaration and DG container sea shipment
For trader orders, we welcome disclosure of end-user information and genuine end-use for joint compliance review
For stock availability, quotation, MSDS samples or document templates for different concentrations, please contact Guangxi Avatar Chemical Co., Ltd. We will provide tailored procurement and compliance advice according to your application and destination requirements.
This document is for buyer reference only and does not constitute legal or regulatory advice. Laws, catalogues and control measures of China and destination countries are subject to continuous updates. Classification, purchase filing and export approval of perchloric acid shall follow the latest requirements issued by competent authorities. Physical and chemical data in this document shall be subject to the accompanying SDS and test reports.