Toluene Product Guide: Properties, Standards, Packaging & Procurement Verification

2026-11-07 17:22

Toluene Product Guide: Properties, Standards, Packaging & Procurement Verification

Toluene (CAS No. 108-88-3) is a colorless, clear, flammable aromatic hydrocarbon liquid. It is widely used as an industrial solvent and high-octane gasoline additive, and serves as a critical feedstock for various chemical intermediates. Classified as a Category III precursor chemical, toluene is regulated as a hazardous chemical in China.

When sourcing toluene, purity, quality grade, and packaging are three independent verification dimensions — they cannot be used to infer one another.

Guangxi Afanda Chemical Co., Ltd. (Afanda Chemical) supplies toluene as part of our core product portfolio. This guide compiles authoritative physical and chemical data, current standards, and market practices to help buyers clearly define requirements, compare products, and verify delivery documents.

Disclaimer: All physical/chemical data, standard descriptions and packaging specifications in this article are for product selection reference only and do not constitute a supply commitment. Actual product specifications, compliance documents and delivery terms shall be subject to formal contracts, SDS, batch COA and applicable regulatory requirements.

Last updated: November 7, 2026


1. Basic Overview: Purity, Grade & Packaging

Toluene is an aromatic organic compound with the structural formula C₆H₅CH₃ and molecular formula C₇H₈. It is also known as methylbenzene or phenylmethane. At room temperature, it appears as a colorless transparent liquid with a benzene-like aromatic odor and strong refractive power. It is miscible with ethanol, ether, acetone, chloroform, carbon disulfide and glacial acetic acid, and very slightly soluble in water. Toluene is highly flammable; its vapor forms explosive mixtures with air, and high-concentration vapor has anesthetic effects.

Three key parameters must be distinguished during procurement:

  • Purity / content: The proportion of toluene in the product, subject to stated labeling and tolerance ranges.

  • Quality grade: Includes petroleum toluene, coking toluene, and reagent grades (AR / CP), each with different impurity control requirements and application scopes.

  • Packaging specification: Net content per unit — it only reflects logistics form and cannot be used to judge product grade.

Key Physical & Chemical Properties

ItemValue / Description
Molecular formulaC₇H₈
Molecular weight92.14
AppearanceColorless transparent liquid with benzene-like aromatic odor
Boiling point110.6 ℃
Melting / freezing pointApprox. -94.9 ℃
Relative density (water = 1)0.866
Refractive index1.4967
Closed-cup flash point4 ℃
Explosive limit1.2% – 7.0% (by volume)
Autoignition temperature535 ℃
SolubilityVery slightly soluble in water; miscible with benzene, alcohols, ethers and most organic solvents
Acute toxicityRat oral LD₅₀ ≈ 5000 mg/kg, low toxicity class

2. Application Scenarios

Toluene serves bulk industry, fine chemicals and laboratory analysis. Selection should be based on process requirements for distillation range, purity and impurities, rather than a generic "industrial grade" label.

  1. Industrial solvent & gasoline blending componentWidely used as a solvent in coatings, inks and resins, and as a high-octane gasoline additive. Buyers should confirm process limits for impurities, moisture and distillation range before ordering.

  2. Fine chemical intermediate

    • Oxidation yields benzoic acid (and its sodium salt, a common food preservative) and organic synthesis intermediates.

    • Sulfonation produces p-toluenesulfonic acid and its salts, CLT acid, toluene-2,4-disulfonic acid and tosyl chloride — used in detergent additives, fertilizer anti-caking agents, organic pigments, pharmaceuticals and dyes.

    • Nitration products are widely used in polyurethanes, dyes, pigments, rubber additives and pharmaceuticals.

    • Side-chain chlorination yields benzyl chloride, benzal chloride, benzotrichloride and derivatives (benzyl alcohol, benzaldehyde, benzoyl chloride), essential for pharmaceuticals, pesticides, dyes and fragrance synthesis.


  3. Laboratory reagent useReagent-grade toluene is mainly used for extraction, dilution and analytical testing. Toluene vapor is harmful via inhalation; adequate ventilation and personal protection are required during operation.

Safety Note

Toluene has a low flash point and is highly flammable; its vapor can explode when exposed to open flame or high temperature. It irritates skin and mucous membranes and exerts an anesthetic effect on the central nervous system at high concentrations.

The International Agency for Research on Cancer (IARC) classifies toluene as Group 3: Not classifiable as to its carcinogenicity to humans. Nevertheless, its neurotoxicity and irritation risks require strict operational management. All storage and handling must follow the latest SDS and approved safety procedures.


3. Executive Standards

Different production routes and grades follow distinct standards, with varying focus on indicators and impurity control. Always confirm the applicable standard first, then verify specific test items.

  • Petroleum toluene: Follows GB/T 3406-2010 Petroleum Toluene (Chinese national standard), governing distillation range, density, purity and other industrial indicators for bulk industrial use.

  • Reagent-grade toluene: Follows GB/T 684-2006 Chemical Reagent — Toluene, available in Analytical Reagent (AR) and Chemical Pure (CP) grades with strict trace impurity control for laboratory use.

  • Coking toluene: Subject to corresponding coking industry standards.

Commercial reagent toluene typically has a purity of 99.0% or 99.5% and above. Exact limits shall be subject to the full standard text, product specification sheet and purchase agreement. Note: Even with similar purity values, industrial toluene is not equivalent to reagent-grade toluene due to different impurity control systems — direct substitution is not recommended.

When reviewing a batch Certificate of Analysis (COA), verify: product name, grade, batch number, executive standard, test items, specification limits and test results. Information on the package label, specification sheet and COA must be consistent.


4. Common Procurement Misconceptions

Misconception 1: Judging grade by packaging

Glass bottles are common for reagents, and steel drums for industrial products — but packaging only reflects the delivery form. Product grade and quality must always be confirmed via labels, specification sheets and batch test reports.

Misconception 2: Looser management because toluene is "less toxic than benzene"

Although toluene has lower acute toxicity than benzene, long-term exposure may cause neurasthenic syndrome. It remains a flammable hazardous chemical and a Category III precursor. Filing procedures, on-site protection and storage conditions must all be implemented in full compliance with regulations.

Misconception 3: Comparing unit price only, ignoring compliance and delivery terms

Price differences often stem from variations in grade, purity, net content, transport, dangerous goods packaging, inspection and compliance support. Toluene trading involves precursor chemical filing and verification, which affect total cost and legality. Standardize all requirement parameters before comparing quotations.


5. Packaging Options

Toluene is available in three main packaging forms. Not all grades support all packaging types; final specifications are subject to contractual agreement. Selection should consider single consumption, usage frequency, approved storage capacity and on-site handling conditions.

Note: Volume units (mL, L) and mass units (kg) are not directly equivalent — calculate usage based on labeled net content. Toluene must be stored sealed in a cool place. Storage and transport must comply with hazardous chemical regulations.

Packaging FormApplication Description
Glass bottle (typically 500 mL)Laboratory testing and small-scale trials; grade confirmed by accompanying documents
Steel drumStandard for industrial production and mainstream commercial distribution
Bulk / tank truckFor high-volume continuous production customers, metered delivery per contract

6. How to Inquire with Afanda Chemical

To help us quickly match the right product and complete compliance verification smoothly, please prepare the following information when contacting us:

  1. Intended use: Production process or laboratory test method, including applicable standards.

  2. Product requirements: Target grade, purity range and key impurities to control.

  3. Supply volume: Packaging specification per unit, total required quantity and replenishment cycle.

  4. Document requirements: SDS, product specification sheet, batch COA and any filing-related documents.

  5. Delivery details: Consignee, delivery address, receiving conditions and expected arrival time.

Regulatory Compliance Notice: Toluene is a Category III precursor chemical, regulated by public security authorities under the Regulations on Safety Management of Hazardous Chemicals and the Regulations on the Administration of Precursor Chemicals. Both buyer and seller must complete filing and verification procedures in accordance with local regulatory requirements and confirm lawful end use. Filing details are subject to the latest requirements of local competent authorities; this article is not a substitute for official administrative guidance.

Product specifications, supply quantities and delivery schedules are subject to written documents confirmed by both parties.


FAQ

Q: What is the difference between toluene and benzene?

Both are aromatic hydrocarbons, flammable and regulated. Toluene has a methyl group on the benzene ring (C₇H₈), molecular weight 92.14, boiling point 110.6 ℃. It has lower acute toxicity than benzene but still poses neuroanesthetic and irritation risks — safety management must not be relaxed.

Q: Is toluene a precursor chemical?

Yes. Toluene is listed in Category III of the precursor chemical catalogue and is subject to public security supervision. Both purchase and sale require filing and verification procedures as required.

Q: Can petroleum toluene and reagent toluene be substituted for each other?

Direct substitution is not recommended. Petroleum toluene (GB/T 3406-2010) is designed for industrial production; reagent toluene (GB/T 684-2006) is formulated with impurity controls for laboratory analysis. Always select the grade matching your process or test method.

Q: Is toluene toxic?

Toluene is of low toxicity (rat oral LD₅₀ ≈ 5000 mg/kg). It irritates skin and mucous membranes and depresses the central nervous system. Short-term high-concentration inhalation may cause dizziness, headache, nausea and chest tightness; long-term exposure may induce neurasthenic syndrome. Respiratory and skin protection must be applied during operation.

Q: What are the common packaging specifications?

Reagent-grade toluene is commonly supplied in 500 mL glass bottles; industrial-grade toluene is mainly packed in steel drums; bulk tank truck delivery is available for large-volume orders. Exact net contents are subject to our current product specifications and contractual agreement.


English Website Publishing Tips

  1. Recommended placement: Products → Toluene → Technical Guide / Procurement Reference

  2. SEO keywords naturally embedded: toluene, toluene supplier, industrial toluene, reagent toluene, CAS 108-88-3, toluene SDS, toluene COA, hazardous chemical toluene, precursor chemical

  3. Format suggestion: Use H1 for the title, H2 for sections, responsive tables, and collapsible FAQ panels for better mobile reading experience

  4. Tone: Formal, technical and buyer-oriented, consistent with international B2B chemical trade conventions



Telephone:+86-180-2201-5008
WhatsApp consultation
+8618022015008
WeChat Customer Service
Scan the code for consultation.